Tips For Replacing a Window Handle
It is easy to change your window handle in the convenience of your own home. Follow these guidelines to ensure a smooth and beautiful finish.
Remove the screw covers from your uPVC handle to reveal the screws. Make sure you measure the spindle in order to make sure you are getting the right size replacement.
1. Measure the Spindle Length
It is essential to ensure the correct size of the spindle when replacing a window handle. This is because it will affect how tight or loose the handle is and whether it will lock correctly within the window frame. The spindle is a metal shaft that connects to the handle as well as the lock within the window frame. The spindle can be either a standard industry 8mm cross-section or the earlier 9mm versions. The current industry standard is 8mm, but this wasn't always the case, so when buying a new handle it's essential to check the measurements.
The most efficient method to determine the spindle length is to take off the handle you have already installed, this can be done by turning it into an open position and then removing the two screws (which might be hidden behind plastic caps that will need to be removed) that retain the handle. After the handle is removed, measure the distance from the base to the point at which it ends. This will give you the measurements needed to purchase a replacement.
There are many options available when you are looking to pick the right window handle. From sleek chrome that fits in with a modern style, to traditional burnished bronze that looks great in restored Georgian rooms, or even the more traditional Tudor Cottages with curled mongoose-tail latches. There are many options, but the most important thing is to pick a style that matches your home's decor.
Espag handles are generally installed to uPVC windows and are always identical in size with 43mm centers (2 fixings). Cockspur handles are available in a variety of sizes, from 58mm up to 62mm. Cadenza window handles have a different size due to their angled blade which operates the multi-point lock mechanism within the window.
door handle replacement to consider when selecting the right window handle is knowing what hand you require, this is simply defined by what hand you use to open the door. Inline espag handles are compatible for left or right-handed windows. Cranked window handles are handed and can only be used on windows that open in only one direction.
2. Remove the Handle
Whether the handle is damaged or just worn out or simply worn out, a window handle that falls off can be very frustrating. The good news is that you can fix the uPVC handle yourself. All you require is the most basic tools and some time to complete the process.
First, you must open the window, and ensure that it is not locked. Then, remove the screw caps holding the handle in place. After the screw caps are removed then you'll be able to take off the handle.
The handle is attached to a spindle within the window frame. Based on the type it is secured by a screw or a pin. The most popular types of handles are inline Espagnolette handles and handles with cockspurs. Both of these kinds of handles are utilized on casement windows, as well as aluminum windows. The handles can be locked by using a key to stop unauthorised access from outside. Or you can lock the handles by turning them clockwise.
To remove the handle, you will need to use an screwdriver with a flat blade in order to release the clip holding the handle in place. Once the clip is released, the handle should slide off the spindle. When the handle is removed, you'll have to determine the length of the spindle and make sure that the new handle is compatible with the spindle's length.
Once you have the proper size, you can fix the new handle into place. You will need to make sure that the new handle is securely attached and that it turns the correct way (clockwise for open or counterclockwise for closed). It is also important to check that it isn't fitted upside down.
Replace the cap screws. After you've done this then you can test the handle to confirm that it works correctly. It is also recommended to test the locking mechanism by moving the handle until it is locked position, and then returning it to the locked position.
3. Take the Screws off
A uPVC window handle is a crucial element of any home and is often the first thing to begin to show signs of wear and wear and tear or damage. This could be due to natural factors or through regular use, or intentional damage caused by criminals who may seek to open a closed window and gain entry to your property. A simple replacement can solve the issue and stop it from repeating itself.
uPVC handles can also be difficult to open when the locking mechanism isn't working properly. In most cases, the issue can be resolved by replacing the multipoint lock rather than the entire handle. It's definitely worth a look because it could save you money.
After you've removed the old handle you'll need to take off the screws that were holding it in place. They're usually on the inside of the base of the handle. It could be necessary to use a screwdriver to accomplish this. Be cautious not to over tighten the handle as this could cause it to become loose.
The next step is to locate the fixing screws or pins that hold the new handle in place. These are likely to be located on the inside of the base of the handle and you'll need a screwdriver or a pair of pliers to remove them. If you want to replace them, you can do so by replacing the caps on the screws and check the handle to ensure it functions correctly.
If you're ready to put in the new handle, simply align the spindle with the cut-out in the window mechanism and screw it into the appropriate position. Make sure the handle is in an open position and that the screws are secured before replacing the screws' covers should you wish to do so. It's done! You can enjoy the newly installed window handle. This should allow you to avoid costly door and window replacements in the future. If you'd like more assistance regarding this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Fit the New Handle
The replacement of a damaged window handle or updating it is easy and can be accomplished in just a few steps. Identifying the type of window handle, determining the length of its spindle and knowing the tools you'll require to finish the job are crucial. Always prioritise security when working with windows and tools. It's also important to take your time and follow the steps with care to ensure that you have a functional handle that is safe to use.
To begin, locate the screws that hold your window handle. Take them off while firmly gripping the handle to stop it from falling down and causing injury. After the screws have been removed, you can place them in a safe location to be replaced in the future.
Once the old handle has been removed, you are now able to begin to fit the new one. It is important that the handle fits perfectly to ensure that it functions correctly and locks the window in place. Then you need to slide the square metal bar attached to the handle into the hole in the window mechanism.
The final step is to replace the caps on the screws and test the handle to ensure that it works. If you're not happy with the result or if your window doesn't open and close as it should then the next step is to contact our experts who will be able to help.
Almost all homes in the UK have uPVC windows. As such, many of them will require to be replaced at some point because of wear or damage. Anyone with a little DIY experience can easily accomplish the task. The most crucial aspect to the success of the procedure is making sure you're using a replacement handle that matches the existing window in terms of size and design. If you're not sure about the type of handle you need, feel free to get in touch with our team who can help you navigate the various possibilities available.